Union Pacific SD_70M_4489 Eng and AI

---------------------------------------

Credits: Original sd70M_9804 by Danny Beck & MLT, Repaint is of the Union Pacific's SD70M by Roger Gilbert/Railartist and Railartist.inc, special thanks to "Danny Beck for the opportunity to repaint his fine model

---------------------------------------

Installation:

1.  You must have MLT's SP_SD70M_9804 from the cascade division line, a locomotive from the now "sad to say" defunct MLT (Maple Leaf Tracks).

2.  unzip or extract upsd4489.zip to the default location for MSTS Files\Microsoft Games\Train Simulator\TRAINS\TRAINSET.
Copy the .S file from SP_SD70M_9804 to UP_SD70M_4489 and rename it to UP_SD70M_4489.s Copy the cabview from SP_SD70M_9804 to UP_SD70M_4489

3. Add the engine to a consist using the MSTS Activity Editor or ConBuilder (available in the Train-Sim.com file library).

4. Drive!
------------------------------------------
Bugs or anomally..Note on the right nose you will see a slight alpha crosshatching at longer distances (won't see it if your 32 bit settings are on.) because of being on the original model By Danny Beck and has nothing to do with my repaint and does not effect operation..really its no big deal>

---------------------------------------

Note: I (Roger Gilbert AKA Railartist) am not a part of, or affilliated with MLT or Danny Beck in any way. If you wish to send comments to me, or have questions send them to railartist@earthlink.net

None of MLT's original Files, content, cabs, sounds, physics and or model(s) can or are to be used in or on any  other project without the express written permission of Danny Beck.   These Files may not be Distributed or Re-Distributed via any other medium other than by WWW.Train-Sim.com without the express written consent of railartist Inc.and or Danny Beck. For any Questions contact railartist@earthlink.net

(C)Repaint Copyright 2004 Railartist Inc. 
All rights reserved!
