;Tomix TCL File c090101 ;Plan 90 (with yard) - sequence for track cleaning train ;Translated by Richard D. Kerr Rev. 2020-07-16 ;from https://www.youtube.com/watch?v=67ZeUy7bQ-g at 1:05 in video ;runs fully at 6:14 to 8:37 in video SW 1 ;Control Unit Display Time is set to 1 second SF 3 ;Frequency is set to 3 (200Hz) DF ;Display the Frequency PA 0,1 ;Parameter Set 0 is assigned to Train 1 PA 0,2 ;Parameter Set 0 is assigned to Train 2 SR 1 ;Repetition Count is set to 1 DR ;Display the Repetition Count ST 0.30 ;Repetition Time is set to 0 minutes 30 seconds DT ;Display the Repetition Time ;Reset Points CP 1.1,0 ;Change Point 1.1 to straight CP 1.2,0 ;Change Point 1.2 to straight CP 1.3,0 ;Change Point 1.3 to straight CP 1.4,0 ;Change Point 1.4 to straight SA 0 ;Operation Mode is set to 0 (Forwarding Mode) SM 1.2,2 ;Origin sensor is set to S1-2 with Option 2 (Forward) SM 1.4 ;Destination sensor is set to S1-4 SM 1.8 ;Destination sensor is set to S1-8 SM 1.6 ;Destination sensor is set to S1-6 SM 1.2,6 ;Destination sensor is set to S1-2 with Option 6 (end) RN ;Start running CP 1.1,1 ;Change Point 1.1 to curved SA 0 ;Operation Mode is set to 0 (Forwarding Mode) SM 1.2,2 ;Origin sensor is set to S1-2 with Option 2 (Forward) SM 1.4 ;Destination sensor is set to S1-4 SM 1.8 ;Destination sensor is set to S1-8 SM 1.6 ;Destination sensor is set to S1-6 SM 1.2,6 ;Destination sensor is set to S1-2 with Option 6 (end) RN ;Start running SA 0 ;Operation Mode is set to 0 (Forwarding Mode) ;SM 1.2,3 ;Origin sensor is set to S1-2 with Option 3 (Reverse) SM 1.6,3 ;Origin sensor is set to S1-6 with Option 3 (Reverse) SM 1.8,6 ;Destination sensor is set to S1-8 with Option 6 (end) RN ;Start running CP 1.2,1 ;Change Point 1.2 to curved SA 0 ;Operation Mode is set to 0 (Forwarding Mode) SM 1.8,2 ;Origin sensor is set to S1-8 with Option 2 (Forward) SM 1.6 ;Destination sensor is set to S1-6 SM 1.2,6 ;Destination sensor is set to S1-2 with Option 6 (end) RN ;Start running SA 0 ;Operation Mode is set to 0 (Forwarding Mode) ;SM 1.2,3 ;Origin sensor is set to S1-2 with Option 3 (Reverse) SM 1.6,3 ;Origin sensor is set to S1-6 with Option 3 (Reverse) SM 1.8,6 ;Destination sensor is set to S1-8 with Option 6 (end) RN ;Start running CP 1.1,0 ;Change Point 1.1 to straight CP 1.2,0 ;Change Point 1.2 to straight SA 0 ;Operation Mode is set to 0 (Forwarding Mode) SM 1.8,2 ;Origin sensor is set to S1-8 with Option 2 (Forward) SM 1.6 ;Destination sensor is set to S1-6 SM 1.2,6 ;Destination sensor is set to S1-2 with Option 6 (end) RN ;Start running WK ;Wait for Keypad Start/Resume button to be pressed SA 0 ;Operation Mode is set to 0 (Forwarding Mode) SM 1.1,3 ;Origin sensor is set to S1-1 with Option 3 (Reverse) SM 1.3 ;Destination sensor is set to S1-3 SM 1.7 ;Destination sensor is set to S1-7 SM 1.5 ;Destination sensor is set to S1-5 SM 1.1,6 RN ;Start running CP 1.3,1 ;Change Point 1.3 to curved SA 0 ;Operation Mode is set to 0 (Forwarding Mode) SM 1.1,3 ;Origin sensor is set to S1-1 with Option 3 (Reverse) SM 1.3 ;Destination sensor is set to S1-3 SM 1.7 ;Destination sensor is set to S1-7 SM 1.5 ;Destination sensor is set to S1-5 SM 1.1,6 ;Destination sensor is set to S1-1 with Option 6 (end) RN SA 0 ;Operation Mode is set to 0 (Forwarding Mode) ;SM 1.1,2 ;Origin sensor is set to S1-1 with Option 2 (Forward) SM 1.5,2 ;Origin sensor is set to S1-5 with Option 2 (Forward) SM 1.7,6 ;Destination sensor is set to S1-7 with Option 6 (end) RN ;Start running CP 1.4,1 ;Change Point 1.4 to curved SA 0 ;Operation Mode is set to 0 (Forwarding Mode) SM 1.7,3 ;Origin sensor is set to S1-7 with Option 3 (Reverse) SM 1.5 ;Destination sensor is set to S1-5 SM 1.1,6 ;Destination sensor is set to S1-1 with Option 6 (end) RN ;Start running SA 0 ;Operation Mode is set to 0 (Forwarding Mode) ;SM 1.1,2 ;Origin sensor is set to S1-1 with Option 2 (Forward) SM 1.5,2 ;Origin sensor is set to S1-5 with Option 2 (Forward) SM 1.7,6 ;Destination sensor is set to S1-7 with Option 6 (end) RN ;Start running CP 1.3,0 ;Change Point 1.3 to straight CP 1.4,0 ;Change Point 1.4 to straight SA 0 ;Operation Mode is set to 0 (Forwarding Mode) SM 1.7,3 ;Origin sensor is set to S1-7 with Option 3 (Reverse) SM 1.5 ;Destination sensor is set to S1-5 SM 1.1,6 ;Destination sensor is set to S1-1 with Option 6 (end) RN ;Start running ;end