|
|
AA Set #1 |
Pennant heralds, both outline and solid, in 24-, 27-, 30-, and 60- inch sizes with white lettering. This is the flag pennant and does not have additional letters or numbering. This set can be used on a number of different cars. |
AA Set #2 |
Compass heralds (one inch) in 15-, 24-, 39-, 42-, and 57- inch sizes with black lettering in the Compass. No lettering or numbering, just the Compass herald. This set also includes the correct two-color compass for the GP-35 locomotives. |
AA Set #3 |
Compass heralds in the same sizes as AA Set#2, but without two-color compass herald. Set has white lettering on the compass. |
AA Set #5 |
Ann Arbor RR Blue/White/Gray RS1 and the Black S3 switchers. Set includes Yellow and white colors. |
AA Set #6 |
This set provides the lettering for any of the Orange paint schemes on the Ann Arbor RR Alco RS1’s and S3 switchers. |
AA Set #7 |
This set is for the Dundee Cement car, a 70-ton ACF Covered Hopper. This was not an Ann Arbor car. The set contains only the lettering DUNDEE CEMENT but the diagram that comes with the set shows other information that you need and can find on commercial sets. One set does one car. |
AA Set #8 |
This decal set contains lettering, numbers, flag and compass herald for the Ann Arbor RR steel caboose. One set can do one or two cars if used carefully. |
AA Set #9 |
This set is for the An Arbor RR FA2’s Yellow lettering and numbers and white numbers. One blue flag for the front of the locomotive. |
AA Set #10 |
This set is the correct size lettering and numbering for the orange paint scheme on the Ann Arbor RR’s GP35’s. |
AA Set #11 |
This set will complete two 500 series covered hoppers in the gray paint scheme. This set has the black original numbers and white repaint numbers. |
AA Set #12 |
This set letters one 52’6" Black Mill gondola assigned the Ann Arbor RR in the 1960’s. This set has white lettering. |
AA Set #13 |
This set goes on the Roberts & Shafer Coaling Tower. The white on blue portion.of the set goes on the hoist house and the white on red portion goes on the coal bin. |
DT&I Santa Caboose |
This set is used to make the wooden Santa Caboose used on the DT&I .A good photo showing this car is on the December page of the 1995 AARRT&HA calendar. It is also given in the Modeler’s Column of our newsletter; Volume 4 Number 4 of 1988. |
|
Green Bay and Western |
The 4 different sets will do 40 and 50 foot cars with "Packers" football on the side of car. |