DIMENSIONS:
VOLTAGE REQUIRED: 16v AC
ACTIVATION: Push button or Rotary button
COMPOSITION: Plastic
INTERFACE REQUIRED: Position sawmill near the
track. Typical receiving car is gondola. Wooden planks are loaded into
the side of the building in preparation to the activation.
ACTION PERFORMED: When button is pushed the half log
on a carriage moves from the far right of the device toward the left in
front of the turning saw blade simulating cutting. When the log stops on
the far left a wooden plan is ejected from the building behind the log representing the plank that was just cut. As the saw returns to the
right of the device, a man with a crane left comes down and picks up the
plank. He then carries it out away from the shed to a spot over the car and drops in inside the
waiting gondola while the log makes another pass at the saw creating the
next plank for pickup.
|
