VOLTAGE REQUIRED: 16V AC
ACTIVATION: Single or Dual push button
INTERFACE REQUIRED: Isolated section of track
ACTION PERFORMED: When the OUT button is pushed, Sam opens the door, exits the shanty and the semaphore arm goes down showing a red light. This action disables the power to the track in front of the shanty causing the oncoming train to stop for train orders. When the IN button is pushed (758A) Sam returns into the shed, door closes, arm goes back up showing green light causing power to be returned to the track and the train departs.
Panel at right shows typical east coast semaphore positioning of arm with light which Sam was styled after.
#758 (1949) Red and white shed with green roof. Single button
#758A (1950-56) Green or Gray base. Double button controller.
|For comments on or questions send E-Mail Message to the Webmasters All information contained on this site is © 1999 - 2006 Badgerland S Gaugers, unless otherwise credited. The views and opinions expressed in the Badgerland S Gaugers WWW Pages are those of the contributor, unless otherwise credited, and do not necessarily represent that of the club it's officers, directors, or the membership. The Badgerland S Gaugers do not offer any warranties, guarantees, nor assume any liability from the information contained on or referenced from this site.|