VOLTAGE REQUIRED: 16V AC
ACTIVATION: Wired to accessories circuit
COMPOSITION: plastic bases and metal tower
INTERFACE REQUIRED: none
ACTION PERFORMED: bubbling tower has a clear tube running up the center of the tower from the base to the catwalk. The light in the base creates sufficient heat to activate bubbles in the fluid suspended in the tube causing an action that appears to show fluid traveling up to the top of the tower. Light is typically wired into accessories circuit due to the couple minute wait time to begin the bubbling action when started.
#773 (1951-52) Oil Derrick "Gulf" Logo
#773 (1950) "American Flyer" Logo
|For comments on or questions send E-Mail Message to the Webmasters All information contained on this site is © 1999 - 2006 Badgerland S Gaugers, unless otherwise credited. The views and opinions expressed in the Badgerland S Gaugers WWW Pages are those of the contributor, unless otherwise credited, and do not necessarily represent that of the club it's officers, directors, or the membership. The Badgerland S Gaugers do not offer any warranties, guarantees, nor assume any liability from the information contained on or referenced from this site.|