VOLTAGE REQUIRED: 16V AC
ACTIVATION: Push Button
COMPOSITION: plastic with metal guard rails
INTERFACE REQUIRED: manual push button and action log car (714 - 914) or gondola
ACTION PERFORMED: Position awaiting log car in front of the loader and push the button. Logs roll down from the back of the unit to the lifting bars in the top center of the base. The lifting bars raise and a single log from the pile is raised for picking. The manned gantry loader comes down from over the car and puts its hooks under the log. The rest supports then drop out of the way and the gantry loader moves the log up the incline to a place over a waiting freight car. When the gantry gets to the top, the hooks swing out and the log is dropped on to the car below. The procedure begins all over again.
#787 (1955-56) Log Loader yellow house w/ red roof
#23787 (1957-60) Log loader
|For comments on or questions send E-Mail Message to the Webmasters All information contained on this site is © 1999 - 2006 Badgerland S Gaugers, unless otherwise credited. The views and opinions expressed in the Badgerland S Gaugers WWW Pages are those of the contributor, unless otherwise credited, and do not necessarily represent that of the club it's officers, directors, or the membership. The Badgerland S Gaugers do not offer any warranties, guarantees, nor assume any liability from the information contained on or referenced from this site.|